膜生物反应器中膜污染研究进展

膜生物反应器是近年新发展起来的高效废水处理工艺。本文综述了国内外对膜污染机理研究的最新成果 ,介绍了相应的解决措施 ,展望了今后的发展前景。     

物理化学预处理与膜分离技术的应用

将物理化学预处理与膜分离技术深度处理结合应用于工业废水处理，可使其中的Ｃｒ６＋＜０．５ｍｇ／ｌ，Ｚｎ２＋＜２０ｍｇ／ｌ，ｐＨ６～９。用膜分离技术处理造纸废水可回收其中的木质素和糖份，回收率均为６０％左右。     

膜生物反应器与传统活性污泥工艺除污特性比较

比较了膜生物反应器（MBR）和传统活性污泥工艺（CAS）在相同运行条件下对生活污水的除污特性.结果表明,MBR系统对COD、NH3-N和TN的平均去除率比CAS分别高14.4%、51.2%和37.3%.但MBR中膜的截留使系统相对比较封闭,制约了通过排放高磷污泥的生物法除磷,除磷效率仅为32.9%,低于CAS工艺（43.0%）;将MBR与化学除磷工艺相结合,MBR系统除磷效率可达93.3%.     

Treatment of a dyeing wastewater from a woolen mill using an A/O membrane bio-reactor

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｄｙｅｉｎｇｗａｓｔｅｗａｔｅｒｏｆｗｏｏｌｅｎｍｉｌｌｃｏｎｔａｉｎｓａｌｏｔｋｉｎｄｓｏｆｐｏｌｌｕｔａｎｔｓ,ｓｕｃｈａｓａｃｉｄｉｃｄｙｅｓ,ｄｉｓｐｅｒｓｅｄｙｅｓ,ｍｏｒｄａｎｔｄｙｅｓ,ａｕｘｉｌｉａｒｉｅｓ,ｓａｌｔｓａｎｄｓｏｏｎ .Ｔｈｅｅｆｆｌｕｅｎｔｓｆｒｏｍｗａｓｔｅｗａｔｅｒｔｒｅａｔｍｅｎｔｐｌａｎｔｓｆｏｒｔｒｅａｔｍｅｎｔｏｆｔｈｅｄｙｅｉｎｇｗａｓｔｅｗａｔｅｒｏｆｗｏｏｌｅｎｍｉｌｌｓｗｉｔｈｎｏｒｍａｌｂｉｏｌｏｇｉｃａｌｐｒｏｃｅ…     

染化废水厌氧生物处理技术的研究

鉴于厌氧微生物对偶氮染料的还原裂解作用，开发了以易降解工业有机废水作为外加碳源的染化废水厌氧生物处理的新技术．试验结果表明：在进水ＣＯＤ３１００—３５００ｍｇ／Ｌ，ＣＯＤ总／ＣＯＤ染化比值４０，ＨＲＴ３．０ｄ下，ＣＯＤ去除率＞８０％，最低染化ＣＯＤ去除率＞４５％，色度去除率＞８５％；实验证实，在厌氧处理过程中，染料组分的结构已发生了明显的变化；反应器内的污泥大多呈颗粒状；污泥活性和工艺性能可控制工艺运行参数得以维持．     

镉对沉水植物硝酸还原酶和超氧化物歧化酶活性的影响

研究了重金属污染物镉对４种沉水植物（红线草，金鱼藻，黑藻和菹草）硝酸还原酶和超氧化物歧化酶的分子毒理学效应。实验结果表明，一定浓度的镉能诱导沉水植物的硝酸还原酶活性，抑制沉水植物超氧化物歧化酶活性，从而破坏其抗氧化防御系统。镉对沉水植物的毒害存在明显的剂量／效应关系。建议以硝酸还原酶和超氧化物歧化酶的活性变化作为沉水植物受重金属污染的生态毒理学指标。     

Test of membrane bioreactor for waste water treatment in a petrochemical complex

Membrane bioreactor (MBR) used in water and waste water treatment is a developing technique for water pollution control and water reuse. This paper describes a membrane-bioreactor for treatment of waste water in a petrochemical complex. The experimental MBR was a lab scale one composed of an activated sludge bioreactor unit and an ultrafiltration membrane unit. The relationship of COD removal with MLSS and HRT in this MBR was studied. The effects of crossflow velocity, backwash interval and volume of flush liquid on the flux were discussed. The results showed that average removal of COD, oil, SS and turbidity in petrochemical waste water by the MBR was 91%, 86%, 92% and 99% respectively. The average removal of NH₃-N and total phosphorous was 85% and 82%. A coefficient of COD removal, k, was 0.017-0.080 L/(mg.d). The membrane flux maintained higher than 60 L/hm2 bar for 34 days without chemical cleaning when the velocity of crossflow was 3.5-3.9 m/s and the backwash interval was 30 minutes and backwash duration at 20 seconds. The results indicated that it is feasible for MBR technology to be used in petrochemical waste water treatment. The treated water could be considered as a source used to make up water for industrial cooling system or to be reused for other purposes.     

Acid resistance of methanogenic bacteria in a two-stage anaerobic process treating high concentration methanol Wastewater

In this study, the two-stage upflow anaerobic sludge blanket (UASB) system and batch experiments were employed to evaluate the performance of anaerobic digestion for the treatment of high concentration methanol wastewater. The acid resistance of granular sludge and methanogenic bacteria and their metabolizing activity were investigated. The results show that the pH of the first UASB changed from 4.9 to 5.8 and 5.5 to 6.2 for the second reactor. Apparently, these were not the advisable pH levels that common methanogenic bacteria could accept. The methanogenic bacteria of the system, viz. Methanosarcina barkeri, had some acid resistance and could still degrade methanol at pH 5.0. If the methanogenic bacteria were trained further, their acid resistance would be improved somewhat. Granular sludge of the system could protect the methanogenic bacteria within its body against the impact of the acidic environment and make them degrade methanol at pH 4.5. The performance of granular sludge was attributed to its structure, bacteria species, and the distribution of bacterium inside the granule. Translated from Acta Scientiae Circumstantiae, 2004, 24(4): 633–636 [译自: 环境科学学报]     

城市污水处理厂预热处理混合污泥的高温厌氧消化特性研究

针对165℃、30min预处理后的混合污泥,进行高温厌氧消化的连续试验.研究了在不同的水力停留时间(HRT)下的产气量、有机物的分解率等指标,探讨了"热处理 高温消化"实用化的可行性.结果表明,总固体(TS)为70g·L-1、预热处理后的混合污泥经高温厌氧消化,在HRT.为10、20、30d的条件下,产气率为2.82、1.70和1.19 L·L-1·d-1;降解单位COD的产气量为968、1053和1091 L·kg-1;COD分解率为47%～52%;有机物分解率与HRT的关系符合一级反应动力学关系.COD物质平衡计算结果表明,基质中50%的固态有机物被分解转化,生物气中的甲烷含量可达59.1%.本研究中的厌氧消化反应可归纳为C8.38H19.7O7.59N 3.86H2O→4.38CH4 2.99CO2 NH4 HCO3-.     

膜生物反应器运行中的膜污染问题

这了各国研究者针对膜生物反应器中的膜污染问题所作的工作，认为膜本身的性质以及废水组成和工艺条件都是造成膜污染的主要原因，利用反冲洗和清洗手段，可以有效地改善膜的性能，以提高膜的寿命，膜生物反应器技术的改进是避免膜污染的新思路。